1994.5-1997 Ford Powerstroke 7.3L Valair Ceramic Clutch


Fits: 1994.5-1997 Ford Powerstroke 7.3L

(600HP / 1100 Ft/Lbs)

SKU: VC7 Categories: ,


These clutches utilize two ceramic facings on the clutch disc and are aimed at the high performance trucks, these are the best of bad clutches. Driving manners are very performance oriented with no clutch slip, basically the clutch is in, or it is out. Great holding capacity for highly modified trucks, the only way you will get more holding power is to go to a Double Disc Clutch setup. Ceramic is a very hard material so typically flywheel wear is more noticeable using a ceramic clutch than with other materials. Pedal pressure is typically a little higher than factory pedal pressure depending on plate pressure(3200#, 3400#, 3800#). Drive train and Hydraulic upgrades are recommended. Some clutch rattle may be noticed while idling in neutral.  Ideally suited to trucks with high performance power modifications with 550-650HP.
(Not recommended for towing)


13″ x 1.25″ Performance Replacement
HD Spring Hub
Ceramic Button

Rated @ 600HP / 1100 ft lbs Torque
3400# Pressure Plate
Kit includes:3400# Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing and Alignment Tool.
***NOTE: Requires V2140 Flywheel***

This kits convert the Dual Mass 11″ Flywheel and Clutch to Solid 13″ Flywheel and Clutch.

Additional information

Weight 80 lbs
Dimensions 24 × 24 × 8 in

I already have Valair V2140, No, Yes