94.5-97 Ford Powerstroke Valair Ceramic/Kevlar Single Clutch

$853.48$1,062.09

Fits: 1994.5-1997 Ford Powerstroke 7.3L

(500HP / 1000 Ft/Lbs)

SKU: VC8 Categories: ,

Description

Ceramic/Kevlar
Utilizing two different buttons on the clutch disc these clutches are aimed at the moderate performance trucks. Driving manners are very good for everyday driving and towing. Take-offs are very smooth and offer a little more slip and forgiveness than the feramic/feramic and ceramic/ceramic clutches. While the holding power for the iron faced clutch is the same as for the organic/feramic faced, the main advantage is less wear on the flywheel and longer life. Pedal pressure is typically a little higher than factory pedal pressure depending on plate pressure(3400#). Drive train and Hydraulic upgrades are not usually required. Some clutch rattle may be noticed while idling in neutral.  Ideally suited to trucks with moderate performance power modifications with 350-500HP.

(highly recommended for towing)

 

This is not a Dual Disc Clutch. Picture is showing both sides of disc.

13″ x 1.25″ Performance Replacement
HD Spring Hub
Ceramic / Kevlar Buttons (Both sides of disc shown)

Rated @ 500HP / 1000 ft lbs Torque
3400# Pressure Plate
Kit includes:3400# Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing and Alignment Tool.
***NOTE: Requires V2140 Flywheel***

This kits convert the Dual Mass 11″ Flywheel and Clutch to Solid 13″ Flywheel and Clutch.

Additional information

Weight 80 lbs
Dimensions 24 × 24 × 10 in
Flywheel

I already have Valair V2140, No, Yes