94-03 Ford Powerstroke 7.3L Combo Kit With 4" Polished Intake

94-03 FORD POWERSTROKE DIESEL 7.3L

Brand New TS Performance 6 position Chip and Super Performance intake kit for your powerstroke 7.3 This will improve mpg and horsepower at the same time.

With the payment I will need your: Truck Year, Manufacture Date (Located on driver side door jam), Manual/Auto and six programs you selected (stock, 50, 75, 100, 140, High Idle, Valet, Anti-theft)

Valet mode not available on 94-97 models

Shift On The Fly!!

STOCK - Reverts your truck back to the stock program
HIGH IDLE - 1200 RPM, Great for cold weather starts
VALET - maximum speed of 70mph
ANTI-THEFT - Truck will not start in this position
50HP/90 ft-lbs torque - Tow
75HP/140 ft-lbs torque - Tow/Street
100HP/185 ft-lbs torque - HOT Street
140+ EXTREME/260 ft-lbs torque - RACE

The transmission will be tuned also for firmer shifts, torque converter will lock-up sooner, and added line pressure for the added HP over stock.

THESE CHIPS ARE OFFICIAL TS CHIPS, THEY ARE NOT RE BURNT THEY ARE NEW, THEY ARE NOT REMANUFACTURED OR REPAIRED. THEY ARE NEW IN THE BOX WITH THE TS WARRANTY.

This is a Brand New SUPER PERFORMANCE 4" Polished intake with the aFe Filter or the K&N Air Filter, cold air induction system for the F-250, F-350, F-450, F-550 or Excursion Ford Powerstroke 94.5-03 with the 7.3L. It will work on all 7.3L engines.

This proven to increase HP 30+
Increases Boost 1-2 psi
Increase TQ. 40+
Increase 1-2 MPG
Cleanable Filter
Lower EGT Temps
High Temperature Silicone Coupler
Complete Kit ready to bolt on! With Instructions!
K&N RE-0870 Filter

Boost Relief Valve (Optional)
The SES light for overboost will come on at about 25 lbs. causing the PCM to decrease fuel delivery attempting to control the boost. This condition usually occurs in "chipped" vehicles. The BRV+ (Boost Relief Valve Plus) will relieve any excess pressure to the map sensor while allowing the engine to receive full boost. No more SES light and full fuel delivery through all RPM and boost ranges. Includes Instructions for easy installation.

Turbo Billet Wicked Wheel 2 (Optional)

Wicked Wheel® is a registered trademark of Bob Riley and DIESELSITE, INC.  All rights reserved. Any intent to mislead or confuse customers by using our name or mark is a violation of trademark infringement and will be enforced. 

FOR STOCK TURBO APPLICATIONS
FROM 1994-2003                          

DO NOT USE AN IMPACT
WRENCH TO CHANGE TURBO WHEELS! Impact wrenches cause stress fractures in the shaft that will cause failure either very soon or thousands of miles down the road. It's like a crack in your windshield that grows over time. Take your time and remove the turbo, hold onto the turbine shaft and remove the compressor wheel with an open end wrench.
94-03 Ford Powerstroke 7.3L Combo Kit With 4" Polished Intake
Click To Enlarge
  • Item #: 013.
  • Manufacturer: Advance Diesel
  • Manufacturer's Product Number: 013
  * Marked fields are required.
*
Qty*
Price $359.99

Related Items

Reviews (0) Write a Review
No Reviews. Write a Review